Pace-edwards SWITCHBLADE Ford Superduty User Manual download pdf (Page 3)

Remove the protective paper on the underside of the Rail ﬂ anges. This for packaging purposes

only. The rails shipped with plastic shims pre-installed to the Rail Brackets for proper spacing.

Ensure those shims are in place.

Next identify the left and right side rails. The plastic rail endcap should be towards the tailgate

while the rail ﬂ ange, shims and brackets towards the outside of the truck bed. Install the rails

by ﬁ rst guiding Handle Assembly into the open channel of the rail and then sliding the rail

against the blanket guide on the canister. Attach the rail to the canister using the rail bolt, lock

washer and ﬂ at washer throught the blanket guide and into the bottom of the rail.

INSTALLATION INSTRUCTIONS

Use the Pull Strap and one canister ﬂ ange to

lift and steady the unit. Wrap the Pull Strap

around the center of the canister a couple

STEP 2: POSITIONING CANISTER

STEP 4: REPOSITIONING CANISTER

STEP 3: INSTALLING RAILS

FIG. 3a

Blanket

Guide

HARDWARE USED:

1/4-20 x 1”

RAIL BOLT x 2

1/4” FLAT WASHER x 2

1/4” LOCK WASHER x 2

Canister

Flat Washer

Lock Washer

Rail Bolt

Guide Handle Assembly

in here

Rail Bracket

and shim

Clamp Relief

Left Rail

Place the Canister in truck bed just behind the cab and center it

from side to side. Ensuring that the canister is centered in the bed

will help assemble the rails to canister in the next step.

times and

double it

up in your

hand.

1 2 3 4 5 6 7 8

No comments

Pace-edwards SWITCHBLADE Ford Superduty User Manual Page 3