Pace-edwards Manual Retractable Utility Bed User Manual download pdf (Page 9)

INSTALLING THE OPTIONAL TAILGATE LOCK

THIS IS ONLY USED WHEN YOUR COVER GOES TO THE TOP OF THE TAILGATE AND YOUR TAILGATE

IS NON-LOCKING. IT IS AN OPTION YOU MUST SPECIFY YOU WANT WHEN ORDERING.

Attach the (optional) tailgate lock angle piece to the cover. using the 10 x ¾ BLACK SHEET METAL SCREW (x

2) (Figure 12A) (If your truck has a lockable tailgate this may not be needed.)

Transfer the location of the angle to the tailgate. (Figures 12B & 12C) We put masking tape down so as to not

mark directly on the tailgate.

Correctly position the tailgate lock block, match drill the holes into the tailgate and attach the tailgate block to

the tailgate. Using the #8 x 1¼ SCREW (x 4) (Figures 12D & 12E)

UTILITY BED COVER INSTALLATION INSTRUCTIONS 9

Fig. 12A

Fig. 12C

Fig. 12B

Fig. 12E

Fig. 12D

HELPFUL MAINTENANCE HINTS

To assure quiet, smooth operation, apply a small amount of grease to the guide strips where the metal end of

the panels and the guide strips meet. This initial application should be sufﬁ cient for a year or more. Regrease the

guide strips if the cover begins squeaking during use.

Drain tubes may become clogged over time and should be removed and cleaned.

Periodically remove the top cover and clean out the canister.

To help keep the tonneau cover looking its best, we recommend washing it the same as caring for your truck

ﬁ nish.

If you have any questions please call our Technical Support at (800) 338-3697.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Pace-edwards Manual Retractable Utility Bed User Manual Page 9